There are 4 ways to set up a proxy for the Binance desktop client on Mac: System Proxy (System Settings → Network → Proxies), Client Built-in Proxy (Binance Settings → Network → Proxy), Third-party Tool TUN Mode (Clash, Surge, etc., which direct all traffic to the proxy), and SSH Tunnel (ssh -D 1080). The most stable method is TUN mode, as the client requires no individual configuration. First, download the official client from the Binance Official Website; for mobile sync, use the Binance Official APP. This article demonstrates detailed commands and precautions for each method.
I. Why Need a Proxy
- Network environment restrictions prevent direct access to binance.com;
- Local ISP packet loss occurs, making a proxy more stable;
- Need to switch to a specific regional node;
- Corporate networks force all traffic through a company proxy.
Important Note: Using a proxy/VPN to access an exchange must comply with local laws and regulations; this article is for technical explanation only.
II. Proxy Types Comparison
| Proxy Type | Protocol | Speed | Ease of Config | Suitable Scenarios |
|---|---|---|---|---|
| HTTP | TCP | Medium | Easy | Browser |
| HTTPS | TLS | Medium | Easy | Sensitive scenarios |
| SOCKS5 | TCP/UDP | High | Medium | Versatile |
| SSH Tunnel | TCP | Low | Hard | Private server |
| WireGuard | UDP | Very High | Medium | VPN |
| TUN (Global) | Any | High | Easy | App-agnostic |
The Binance client is based on Electron and reads system proxies by default; however, in certain network environments, TUN mode is recommended as the most reliable.
III. Method 1: System Proxy
1. Open System Proxy Settings
System Settings → Network → Select Current Network (Wi-Fi/Ethernet) → Details → Proxies.
2. Fill in Proxy Information
Check boxes based on the proxy type:
- Web Proxy (HTTP): 127.0.0.1, Port 7890
- Secure Web Proxy (HTTPS): Same as above
- SOCKS Proxy: 127.0.0.1, Port 7891
3. Apply Changes
Click "OK" to confirm. The Binance client will automatically read the new system proxy.
4. Command Line Verification
scutil --proxy
The output will list fields like HTTPEnable / SOCKSEnable.
IV. Method 2: Client Built-in Proxy
1. Open Client Settings
Binance Client → Command + , → Network → Proxy.
2. Configure Proxy
- Type: HTTP / HTTPS / SOCKS5
- Host: 127.0.0.1
- Port: 7890 (or matching port)
- Username/Password: Optional (if required by the proxy)
3. Test Connectivity
Click "Test Connection" → If it shows "Connection successful," you can save.
4. Roll Back to System Proxy
To temporarily disable the client proxy, select "Use System Proxy."
V. Method 3: Clash Verge (TUN Mode)
1. Installation
brew install --cask clash-verge-rev
Or download the dmg from GitHub Releases.
2. Import Subscription
Launch Clash Verge for the first time → Profiles → New → Paste subscription link or local YAML config.
3. Enable TUN Mode
Settings → Tun Mode → On. Now all application traffic (including Binance and terminal curl) will go through the proxy.
4. Set as System Proxy (Optional)
Clash Verge can enable TUN + System Proxy simultaneously. It is recommended to use only TUN to avoid duplicate proxying.
5. Rule-based Shunting
The rules in the Clash config can provide granular control:
rules:
- DOMAIN-SUFFIX,binance.com,Proxy
- DOMAIN-SUFFIX,binance.info,Proxy
- DOMAIN-SUFFIX,binance.vision,Proxy
- GEOIP,CN,DIRECT
- MATCH,Proxy
Binance-related domains go through the proxy, local IPs connect directly, and others go through the proxy.
VI. Method 4: SSH Tunnel
1. Requires an Overseas VPS
Users with servers overseas can use an SSH tunnel directly:
ssh -D 1080 -C -N [email protected]
-D 1080: Dynamic port forwarding (SOCKS5)-C: Enable compression-N: Do not execute remote commands
2. Configure Binance Client
Client Proxy → SOCKS5 → 127.0.0.1:1080 → Test Connection.
3. Maintain Persistent Connection
Use autossh to prevent disconnection:
brew install autossh
autossh -M 20000 -f -N -D 1080 [email protected]
4. As a launchd Service
Create ~/Library/LaunchAgents/com.user.ssh-tunnel.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.user.ssh-tunnel</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/ssh</string>
<string>-D</string>
<string>1080</string>
<string>-C</string>
<string>-N</string>
<string>[email protected]</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
</dict>
</plist>
Load:
launchctl load ~/Library/LaunchAgents/com.user.ssh-tunnel.plist
VII. WireGuard Solution
WireGuard is the next-generation VPN with much lower latency than traditional OpenVPN.
1. Installation
brew install --cask wireguard
Or download the WireGuard app from the Mac App Store.
2. Import Configuration
Config file format:
[Interface]
PrivateKey = <your private key>
Address = 10.0.0.2/32
DNS = 1.1.1.1
[Peer]
PublicKey = <server public key>
Endpoint = server.example.com:51820
AllowedIPs = 0.0.0.0/0
PersistentKeepalive = 25
3. Connect
Click "Activate" in the WireGuard app. All traffic will go through the VPN, and no extra settings are needed for the Binance client.
VIII. Proxy Troubleshooting
1. Check Proxy Port
lsof -i :7890
2. Direct curl Test
curl -x socks5h://127.0.0.1:1080 https://api.binance.com/api/v3/ping
Returning {} means it works.
3. Check for DNS Leaks
curl https://dnsleaktest.com/
Or visit ipleak.net to see if DNS goes through the proxy.
4. Ping Test Latency
curl -o /dev/null -s -w '%{time_total}s\n' https://api.binance.com/api/v3/ping
Ideal latency is < 200ms; if it exceeds 500ms, it's recommended to switch nodes.
IX. Recommended Solutions for Different Scenarios
| Scenario | Recommended Solution |
|---|---|
| Corporate Office Network | System Proxy + Client Built-in |
| Home Wi-Fi | Clash Verge TUN Mode |
| Travel/Multi-region | WireGuard Multi-config |
| Private VPS | SSH Tunnel + autossh |
| High-frequency Quant | WireGuard direct to nearest DC |
X. Security Tips
- Free proxies carry high risks and may steal login tokens;
- 2FA + Anti-phishing code must be enabled, see the Security Hardening category for details;
- Avoid using legacy proxies that do not support HTTPS;
- Regularly change VPS passwords and SSH keys;
- Bind API Keys to a proxy IP whitelist to limit usage even if the proxy is leaked.
Frequently Asked Questions (FAQ)
Q1: Does the client start slower after enabling a proxy?
A: Proxy handshakes add 200-500ms of initial connection latency. If it exceeds 2 seconds, it means the proxy itself is slow or the node is congested; simply switch nodes. TUN mode is usually faster than in-app proxies.
Q2: Does terminal command traffic also go through the proxy in TUN mode?
A: Yes, by default. TUN essentially takes over all networking at the system level. To allow certain commands to connect directly, you can add rules like DOMAIN-SUFFIX,apple.com,DIRECT in the Clash config.
Q3: How to automatically reconnect the SSH tunnel if it disconnects?
A: Use autossh with ServerAliveInterval 30 and ServerAliveCountMax 3, combined with launchd's KeepAlive, to achieve automatic reconnection within 30 seconds.
Q4: Does Binance show "IP Verification Failed" after switching proxies?
A: Binance has IP anomaly detection; frequent node switching in a short period will trigger it. It's recommended to stay on the same node within 24 hours; if you must switch, log in through the web version first to complete a 2FA.
Q5: Can I have only the Binance client go through the proxy while other apps connect directly?
A: Yes. Use tools like Proxyman or Surge that support per-process proxying to bind the Binance process to a specific proxy while other apps remain direct. This method is more granular than TUN mode.
Check the Mac Guide category in the Tutorials for more network configuration articles.